Mem Protect, Auto Load, Patch Update, Initialize | Lexicon PCM 80

PCM 80 User Guide	Lexicon

1.5 Mem Protect

The PCM 80 provides a memory protection feature to prevent accidental overwriting of your stored effects. When this control is set to On, pressing the front panel Store button will cause an error message to be displayed. To enable the Store function, turn ADJUST to select Off.

1.6 Auto Load

This control allows you to choose whether PCM 80 effects will be loaded immediately when selected with SELECT and the Up and Down buttons (On), or whether they will require a press of the Load/✱ button (Off).

1.7 Patch Update

When a controller is patched to an effect parameter, this control determines when the controller will take control of the parameter. If Immediate is selected, stored parameter values will jump to the current controller position when the effect is loaded. If Delayed is selected, the stored parameter value will remain in effect until the controller is moved. See Patching later in this chapter.

1.8 Initialize

Selecting this control arms the PCM 80 to revert to its factory settings.

This will erase all registers and setups, and return the PCM 80 to its default states.

If you press Store, the display will ask "Are you sure?" (Press STORE). If you don't want to reinitialize your unit, press any button to cancel the operation. If you press Store in response to this message, the display will flash "Restoring original factory settings" and your unit will be reinitialized.

2-10

Image 28

Lexicon PCM 80 manual Mem Protect, Auto Load, Patch Update, Initialize

Contents

PCM Precautions Unpacking and Inspection PCM Vigtig information om sikkerhed Wichtige Sicherheitsanweisungen Contents Contents, contd . The Algorithms and their Parameters Presets Contents, contd Introduction Editing Expansion User Interface Block Diagram Headroom Up/DownProgram Banks Load AC Power FootswitchBalanced Outputs Input Level Footswitch/Foot Controller Analog AudioMono Applications Digital Audio Unbalanced Balanced Headroom DisplayOverload Setting Analog and Digital Input Level Setting Output Level Configurations Connection to a mixing consoles effects sendsPress Control Global Pcmcia Sram Memory Card 68 pin, Type Memory CardsPin Simm Memory Module Basic Operation Xxxxxxx Bypass currently selected Row Audio Word Clock Audio Word Clock Ext Prf 44.1kHz Cns 48kHz Error Log Dig In Status Analog In Lvl Dig In Lvl Auto Lock Scms Emphasis Bit Mix ModeOutput Level Bypass Mode/Bypass Src Tempo ModePgm Bypass Patch Update Mem ProtectAuto Load Initialize Row Card Bank Copy Reset FormatReceive Transmit Map OffChain Send Foot Pedal, Foot Sw 1, Foot Sw 2, Adjust AutomationInt Clock SysEx Row Setup Store Control Mode Matrix LocationDefault Setting Tempo Mode Matrix Location Row Mapx Map 0 and Map Row ChainPgm Assign Map Program and Register Banks Chorus+Rvb Register Tempo Mode BeatValue Row Tempo RateSource Tap Source and Tap Level Row Tap Tap DurationAverage Prime Blue Soft Row Compare is on Stored effect active Protection Off Turning MemoryTempo Rate and BeatValue Tap Duration and Average Renaming the Adjust Knob Patch Register Location Concert Hall Plate Band+Rvb Mod Sw Entering Soft Row Assign About Sources Patch Sources Internal Env L Release Env R Rate, P Width, Mode Attack, Release, ModeRate, Shape, P Width, Depth Assigning Values Jump Default values Patching ExamplesJump contd Creating a patch with Patch 1 Dst Unassigned Adjusting the modulation Source parameters Changing the default destination values Adding an additional pivot point to the patch Patch Values 000 Multiple Patches with the Same Destination Algorithms and Their Parameters 4-Voice Algorithms Reverb Shell Algorithms and Their Parameters PCM 80 User Guide Lexicon Algorithms and Their Parameters PCM 80 User Guide Lexicon Algorithms and Their Parameters 6-Voice Algorithms Algorithms and Their Parameters PCM 80 User Guide Lexicon Chorus+Rvb contd PCM 80 User Guide Lexicon Band+Rvb contd Resonant Chord Algorithms Res1Plate Res2Plate Resonant Chord Algorithms Res1Plate Res2Plate contd MstDepth and MstRate Voices Depth and Rate FX Adjust MixInLvl L&R, InPan L&R High Cut Controls contd. FX Width Value Display Label Description Master, GldResp, GldRange, Clear Clear MasterGldResp GldRange Delay Time contd Algorithm Delay TimeExpanded Delay Time Voices Mstr Fbk, Mstr X-Fbk Voices 1-6 Fbk, X-Fbk Mstr LC/HC V1-V6 LoCut and HiCutGld Lvl Left a Lvl L and a Dly L Fbk L/R Glide FX contd Mod LFO Mod AR Env Modulation contd Mod Env L and Mod Env R Modulation contd. Mod Latch Mod Sw 1 and Mod Sw Modulation contd Mode, T Lvl and T Src RateWidth Mode Panning Values DstPCM 80 Patch Sources Tuning Res 1Plate Pitch parametersAssign Active Res 2Plate Pitch parameters Pitch contd V1-V6 Pitch Algorithms and Their Parameters Mstr Res,Mstr HC V1Res,V1 HiCut-V6 Res,V6 HiCutSize Duration Shape, Spread Rvb Design contd DefDepth Spin Pre Delay Mid Rt and Low RtLow Slope and Mid Slope Crossover RefLvl L&R, RefDly L&R EkoFbk L&R,EkoDly L&RPstMix, PstGld Pst Mix PCM 80 User Guide Lexicon Matrix Bank Location Preset Type Program Bank 0 P0 Multi Effects P0 0.0 P0 Flange Rvb Adjust FX Mix Flange+RvbADJUST FX MixEko FlangeADJUST X-Fbk Glide VerbADJUST FX Mix Modulation Effects P0 2.0 P0 3.5 contd Special Effects P0 3.6- P0 Program Bank 1 P1 Rhythmic Echo Delay Effects P1 0.0 P1Special Effects P0 3.6- P0 4.9 contd Rhythmic Echo and Delay Effects P1 0.0 P1 3.6 contd LatchedEkos Adjust EchoWidth PanEQ Bpmadjust Low TonePan-Eko Bpmadjust DarkKnob Tempo VerbADJUST Liveness BandEkoSweepADJUST Mstr Fbk LFO EQ EchoADJUST LC DepthChase EchoADJUST ChaseRate Panned DlysADJUST Mstr Fbk Ambience Effects P1 3.7 P1 Ambience Effects P1 3.7 P1 4.9 contd Program Bank 2 P2EQ Effects P2 0.0 P2 EQ Effects P2 0.0 P2 1.0 contd Spatial Effects P2 1.1 P2 Spatial Effects P2 1.1 P2 2.4 contd Gain Effects P2 2.5 P2 Gain Effects P2 2.5 P2 4.0 contd Pedal SwellADJUST FX Mix Rez Climber Adjust TuningChord WalkADJUST High Cut Mars BarsADJUST High Cut Resonant Chord Effects P2 4.1 P2 4.9 contd Program Bank 3 P3Reverb Effects P3 0.0 P3 Reverb Effects P3 0.0 P3 2.8 contd Plate4 Horns Adjust Impact Alley SlapADJUST Pre DelayDrum GateADJUST Duration Slope Down Adjust Duration Dyna Vibrato Adjust Glide VibroVerbADJUST V-DepthSweepVerbADJUST GldResp EnveloVerbADJUST Rt HC0-40 Remix Effects P3 4.0 P3 4.9 contd Alphabetical Index of Presets PCM 80 User Guide Lexicon Selecting a Midi Channel Accessing Programs Registers Midi Operation Controlling PCM 80 Tempo Rate with Midi Clock Midi Tempo Control Using the PCM 80 as a Midi Clock SourcePCM 80 Tempo 0.2 Source set to Midi PCM 80s Control 3.4 Automation set to OnControl 3.7 Midi SysEx set to Receive On Slaving two or more Midi Transmit Midi Adjust Program Change Messages Reset All Controllers Midi Clock and Clock CommandsAutomation SysEx Automation Dynamic Midi Displayed Name Description Midi Implementation Chart Function Transmitted Recognized RemarksYes OX Selectable PCM 80 User Guide Lexicon PCM 80 doesnt respond to SysEx commands PCM 80 does not transmit SysEx Automation commandsCommon Midi Problems Midi Program Change numbers are off by No Digital Audio Output No Effects Output Restoring Factory Default Settings PCM 80 User Guide Lexicon Audio Input Connectors Audio Output ConnectorsDelay Impedance Digital Audio Interface Connectors Audio Memory Configuration Base memoryExternal Memory Card Connector Footswitch Lexicon Inc Oak Park Bedford MA Telephone Fax