Lexicon PCM 80 manual Press Edit to jump back to the Patch row

PCM 80 User Guide Lexicon

Adding an additional pivot point to the patch

So far, our example uses only two pairs of patch values. The Destination parameter moves linearly between the value assigned at 000 and the value asssigned at 127.

You can watch this change by displaying the Destination parameter. Here’s how to jump directly to it from the patch:

Press Load/✱ repeatedly to return to the Patch 1 Destination selection display.

Patch 1

Controls

✱Dst

FX Width

Press Edit to jump directly to the FX Width parameter in the Controls Row.

Controls

0.5

Patch Destination Indicator

FX Width ■

+0...90 MONO

The FX Width value will be changing from 0 to 90 and back again.

The display will change to show position 0.5 in the Controls Row. Note that the value is changing continuously from 0 to 90 and back again. Notice also the small square in the upper right corner of the display. This patch destination indicator appears whenever a parameter has been assigned as a patch Destination in the effect being edited.

Now let’s return to the Patch row to add a pivot point to the effect.

Press Edit to jump back to the Patch row.

Patch 1	✱ Dst
Controls	FX Width

2-38