PCM 80 User Guide

Lexicon

Dynamic MIDI

The following MIDI messages are available as Dynamic MIDI patch sources:

MIDI Controllers 1-119

Pitch Bend

After Touch (Polyphonic and Channel combined)

Velocity (Note On)

Last Note

Low Note

High Note

Tempo (40–400BPM is converted to controller range 0-127)

Clock Commands

These MIDI messages are also available as threshold sources for several Modulation parameters: AR Env, Latch, Sw 1 and Sw 2. They may also be used as a tap source for controlling Tempo.

MIDI Implementation Details, including System Exclusive documentation, are available to assist experienced programmers in developing software for use with the PCM 80. These can be obtained directly from Lexicon.

Request: PCM 80 MIDI Implementation Details.

Bulk Data Dumps Control mode 3.8 (MIDI Dump) allows selection of the following types of bulk data to be dumped directly from the PCM 80 to another PCM 80, or to editor/ librarian software.

Displayed Name

Description

 

 

CurrentPgm

Currently running effect

Bank R

Internal Register Bank

Bank C0-CK

Card Banks (card must be inserted)

Map 0, 1

Internal Program Change Maps

Map 2-33

Card Program Change Maps (card must be inserted)

Chain 0-9

Internal Program Chains

Chain 10-19

Card Program Chains (card must be inserted)

Int Chains

All Internal Program Chains

Ext Chains

All Card Program Chains (card must be inserted)

Setup C

Current Setup

Setup 0-4

Internal Setups

Setup 5-9

Card Setups

Use ADJUST to select the bulk data type. Press Store to transmit the data .

5-8

Page 126
Image 126
Lexicon PCM 80 manual Dynamic Midi, Displayed Name Description