2.7 BandEkoSweepADJUST: Mstr Fbk 0100

A variation of BankEko Rvb. In this preset, the center frequency of the band pass filter is swept by the LFO producing echoes of shifting colors. Reverb and diffusion are turned off, but you can add them in from the Soft Row. ADJUST controls master feedback for the left and right delays.

2.8 LFO EQ EchoADJUST: LC Depth 0100

A stereo rhythmic effect created by modulating low cut and high cut filters with the LFO sine and cosine waves. Interesting on rhythm tracks and individual instruments. ADJUST controls the depth of the low cut modulation.

2.9 Chase EchoADJUST: ChaseRate 0100

This is LFO EQ Echo with panning added to the filtered delay outputs. ADJUST controls the pan rate.

3.0 Panned DlysADJUST: Mstr Fbk 0–100

In this effect, a pair of delays are panned to produce echoes that drift across stereo space. ADJUST controls the feedback of both delays. More goodies await you in the Soft Row.

3.1 X-Pan DelaysADJUST: Mstr Fbk 0–100

The outputs of the delay pair are cross-panned in this effect. Mono material will produce echoes that repeat, but remain in the center. Stereo material will slowly swap left and right as it repeats. Use ADJUST to set the feedback for both delays.

3.2 Dly>EQ>PansADJUST: Mstr Fbk 0–100

The input signal is split into two frequency bands by this effect. The two bands are then sent through two different rhythmic delays whose outputs are panned in opposite directions. This effect deconstructs the tone of input material, except when the panning and delay rhythms align in the center of the stereo field. Try it with a drum mix or other broad band material. Use ADJUST to set the feedback for both delay voices.

3.3 Ekoz 4 DrumsADJUST: FX Mix 0–100

This preset is a space setter for percussive instruments. It combines a short plate reverb effect with four high density echoes which are highly diffused. ADJUST varies the amount of delay effect to reverb effect.

3.4 Haas PanKnobADJUST: L=0, R=127 0–127

A panner that uses the slight differences in left and right channel delay to produce panning without changing relative levels. Use ADJUST to pan from left to right.

3.5 Dial a DelayADJUST: Delay0–100

This one is your basic delay. Use ADJUST to dial-in up to 2.5 seconds of stereo delay. The Soft Row will take you beyond the basics, with parameters for reverb design, EQ and feedback.

3.6 PrecisionDlyADJUST: L ms/100 0–100

Use this preset if you need precise alignment of left and right channel audio. ADJUST allows you to offset the left channel by up to 1 ms in 100 increments. The Soft Row contains two sets of additional delay controls for the left and right channels, each with 1ms resolution, as well as independent level and panning controls.

The Presets

Rhythmic Echo and Delay Effects

(P1 0.0 – P1 3.6) cont'd.

4-9

Page 105
Image 105
Lexicon PCM 80 manual BandEkoSweepADJUST Mstr Fbk, LFO EQ EchoADJUST LC Depth, Chase EchoADJUST ChaseRate