1.2

Flange >Rvb

ADJUST: FX Mix

0–100

This stereo effect feeds the output of a flanger into a concert hall reverb. ADJUST controls the mix of dry and wet flanged audio. The Soft Row includes master delay and feedback parameters for adding echoes, as well as parameters for modulation and image control.

1.3 Flange+RvbADJUST: FX Mix 0–100

A rich 6 voice chorus in parallel with reverb. ADJUST controls the mix of the two independent stereo effects. The Soft Row includes the essential parameters for creating many variations of this classic combination of effects.

1.4 X Eko FlangeADJUST: X-Fbk 0–100

A stereo flanger with rhythmic echoes feeding into stereo reverb. ADJUST controls the cross-feedback of the echoes (which causes them to bounce from side to side as they repeat). Press Tap to synchronize the echoes with rhythmic sources.

1.5 Glide > VerbADJUST: FX Mix 0–100

Three stereo effects in series: gliding delays, rhythmic echoes and reverb. ADJUST controls the mix of delay effects and reverb. Essential controls for each effect are included in the Soft Row.

1.6 Glide X-EkosADJUST: Eko Time 0–100

Similar to Glide > Verb, but ADJUST lets you dial in echo times from 0 to 2 seconds. Feedback and cross feedback are combined to create echo patterns that change as they repeat.

1.7

Detuned Ekos

ADJUST:

Ekos/Beat

1–24

Plate reverb combined with

independent stereo delays. The delay voices are diffused

and modulated. The echoes are rhythmic — set the tempo with

Tap or MIDI clocks. Use

ADJUST to set the number of echoes per beat.

 

 

1.8

StereoEqEkos

ADJUST:

Ekos/Beat

1–24

Six rhythmic echo voices are EQ’d and panned across stereo space. ADJUST sets the number of repeats per beat.

1.9 ADJUpMyEchosADJUST: EchosLvl 0–10

Concert Hall reverb with 4 panned echo voices in the background. ADJUST controls the level of the echo voices. Press Tap to synchronize the echoes with rhythmic material.

2.0

FSw2 Elevate

ADJUST: Feedback

0–99

Similar to Detuned Ekos, multiple echo voices with diffusion, modulation and a touch of plate reverb. In this effect, Foot Switch 2 is patched to turn on the AR Envelope which, in turn, sweeps the master delay. ADJUST controls the feedback of these rhythmic echoes.

2.1

Chorus &Pan

ADJUST: LFO Rate

0–100

This moving chorus shifts the output signal from left to right, back and forth. ADJUST sets the speed. Increasing the Delay Master parameter will smear the delay images.

2.2 Chorus&AmbADJUST: MstChorus 0–100

Similar to Chorus&Pan but with an added ambience. ADJUST controls the speed and depth of the chorus.

2.3 6 Vox ChorusADJUST: Less/More 0–50

Starting point for all chorus sounds. ADJUST controls both the chorus depth and speed. Use the Delay Master to open or close the spacing between the 6 delay voices.

The Presets

Multi Effects

(P0 0.0 – P0 1.9) cont'd.

Modulation Effects (P0 2.0 – P0 3.5)

4-3

Page 99
Image 99
Lexicon PCM 80 manual Flange Rvb Adjust FX Mix, Flange+RvbADJUST FX Mix, Eko FlangeADJUST X-Fbk, Glide VerbADJUST FX Mix