Lexicon manual ←→, PCM 80 User Guide, Lexicon

PCM 80 User Guide Lexicon

Navigating a Matrix All of the controls available in a mode are arranged in a matrix of up to 10 columns (numbered 0-9) and 10 rows (each numbered .0-.9). This arrangment allows any one of as many as 100 parameters to be selected simply by using the SELECT knob and the Up and Down buttons to select a position in the matrix.

The SELECT knob moves you horizontally across the matrix.

Simultaneously pressing Up and Down will always return you to 0.0

←→

−

The Up and Down buttons move you vertically through the rows of the matrix.

↓

An asterisk in the display indicates that Load /✱ is active and, depending on the mode, will load effects or display additional parameters when pressed.

XXXXXXX✱XXXXXXXXXX

3.6XXXXXXXXXXXXXXXXX

Your current location in the matrix is shown in the lower lefthand corner of the display.

In the Program and Register Banks, the ADJUST knob acts as a soft knob for adjustment of one or more patched effect parameters. In the other modes, ADJUST scrolls through the range of available settings for the control you have selected.

Go or Pro The PCM 80 offers a choice between two levels of Edit mode parameter access. We call these Go mode and Pro mode.

Go mode makes use of an extra row in the edit mode matrix called the Soft Row, where you can assign as many as 10 effect parameters for easy access. Selecting Go mode (Control mode 1.0) limits the action of the Edit button to displaying only the Soft Row parameters assigned to the current effect.

Each preset has a set of Soft Row assignments which we've selected for you (as well as an assignment for the ADJUST knob). When shipped, the PCM 80 will power up in Go mode with the first preset (P0 0.0) loaded. Press Edit to display the Soft Row of parameters.

Pro mode gives you access to the full parameter matrix, including the Soft Row. Use this mode when you want to do in-depth effects editing or patching, or when you want to customize Soft Row assignments.

Go mode and Pro mode selection is made in Control mode at matrix location 1.0.

2-2