zIf 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off.

 

 

 

 

Using the Menus

 

 

 

 

 

Option

 

Description

 

 

 

 

 

 

4:3 Default

 

Wide Zoom

Select to enlarge the 4:3 picture, to fill the 16:9

Select the default

 

 

screen, keeping the original image as much as

screen mode to

 

 

possible.

 

use for 4:3

 

Normal

Select to return the 4:3 picture to normal

sources.

 

 

mode.

 

 

 

 

 

 

 

Full

Select to enlarge the 4:3 picture horizontally

 

 

 

only, to fill the wide screen.

 

 

 

 

 

 

 

Zoom

Select to enlarge the 4:3 picture horizontally

 

 

 

and vertically to an equal aspect ratio that fills

 

 

 

the wide screen.

 

 

 

 

 

 

 

Off

Select to continue using the current screen

 

 

 

mode setting when the channel or input is

 

 

 

changed.

 

 

 

 

Overscan

Normal

Select to return the default Overscan.

 

 

 

 

 

-1

Select to show more information on screen.

 

 

 

 

 

+1

Select to keep the edge of the picture out of

 

 

 

screen.

 

 

 

 

 

Vertical Center

 

Adjust

Allows you to move the position of the picture

 

 

 

up and down in the window. (Available only in

 

 

 

Wide Zoom and Zoom modes.)

 

 

 

Press V or v and press

to choose a

 

 

 

correction between +25 and –25 (Zoom

 

 

 

mode), and +10 and –10 (Wide Zoom mode).

 

 

 

 

Vertical Size

 

Adjust

Allows you to adjust the vertical size of the

 

 

 

picture. (Available only in Wide Zoom and

 

 

 

Zoom modes.)

 

 

 

 

Press V or v and press

to choose a

 

 

 

correction between +7 and –7.

 

 

 

 

 

Menus the Using

105