Setting Up the LCD Projection TV
Satellite Receiver with a VCR and Cable
Disconnect all power sources before making any connections.
1Connect the CATV cable to the single (input) jack of the splitter.
2Using a coaxial cable, connect one of the splitter’s two output jacks to the LCD projection TV’s CABLE jack.
3Using a coaxial cable, connect the splitter’s other output jack to the VCR’s VHF/UHF IN jack.
4Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
5Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks.
6Using A/V and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO IN jacks.
7Run Auto Program, as described in “Setting Up the LCD Projection TV Channel List” on page 58.
44