Introducing the Sony LCD Projection TV

For KDF-WE655 series

✍For instruction for KDF-WF655 series, see page 20.

1 Turn off the power on the main unit. Wait several minutes, then unplug the power cord.

(The cooling fan will continue to operate for about two minutes after turning the power off.)

2Wait at least 30 minutes after unplugging the power cord to allow the lamp to cool down before replacing it.

Take the new lamp out of the box.

✍Do not shake the lamp. Vibration can damage the lamp or shorten its life.

✍Avoid touching the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life.

TV Projection LCD Sony the Introducing

3Loosen the screws on the rear side panel.

This illustration is for KDF-50WE655. The screw for KDF-42WE655 is more to the inside.

(Continued)

17