Introducing the Sony LCD Projection TV

Enjoying Your LCD Projection TV

For KDF-WE655 series

For KDF-WF655 series

Projection lamp

Indicators

Screen

Projection lamp

Indicators

Indicators

The indicators show the current status of your LCD projection TV.

Screen

To minimize reflection, the screen’s surface has a special coating. Read the instructions “Cleaning the Screen Surface” on page 15 carefully before cleaning.

Inappropriate cleaning methods could damage the screen’s finish.

Projection lamp

Your LCD projection TV uses a projection lamp as its light source. The projection lamp is located under the Control Panel cover as noted in the diagram above. Note the following:

❑After turning on your LCD projection TV, it may take a while before the picture appears (1 minute or less).

❑When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-2100U or XL-2100 (for WE655 series), or XL-2200 (for WF655 series) replacement lamp (not supplied).

✍After replacing the lamp, be sure to attach the lamp cover securely; otherwise, your LCD projection TV will not turn on. For details on lamp replacement, see “Replacing the Lamp” on page 16.

✍The light emitted from the lamp is quite bright when your LCD projection TV is in use. To avoid eye discomfort or injury, do not look into the housing when the power is on.

14