Setting Up the LCD Projection TV
DVD Player with | Use this hookup if: | ||
Component | ❑ | Your DVD player has component (Y, | |
Video Connectors | |||
|
| ||
| Disconnect all power sources before making any connections. | ||
| 1 | Using a component video cable, connect the DVD player’s Y, | |
|
| ||
|
| DVD IN 5 or 6 connections. | |
|
|
| |
|
| ✍ The Y, | |
|
| Y, CB and CR, or Y, PB and PR. If so, connect the cables to like colors. | |
| 2 |
| |
| Using an audio cable, connect the DVD player’s AUDIO OUT jacks to | ||
|
| the LCD projection TV’s AUDIO IN jacks. Be sure to use the same row | |
|
| of inputs that you used for the video connection (HD/DVD IN 5 or 6). |
Component video cable (not supplied)
DVD player
Cables are often
Connect red to red, white to white, etc.
Rear of LCD projection TV
Y
PB
PR
| HD | D |
(1 | 0i/720 | |
4 | p/480i | |
5 |
| 6 |
|
|
|
PB
PR
L
AUDIO
R
I
S
Audio cable (not supplied)
✍To take advantage of the Wide Mode, set the DVD player’s aspect ratio to 16:9. For details, refer to the operating instructions supplied with your DVD player.
46