Using the Menus
OptionDescription
Timer 1
Timer 2
Displays...
You can use the Timers to program the LCD projection TV to turn on and off and tune to a specific channel at two scheduled viewing times.
Timer 1 and Timer 2 cannot be set until you set the Current
Time.
1Press V or v to highlight Timer 1 or Timer 2. To set the timer, press b.
✍To go directly to programming Timer 1 or 2, press
instead of pressing b.
2Press V or v to highlight one of the following options, then
press 
.
Program | Select to set the Timer by day, time, |
| duration, and channel. |
Off | Select to turn off the Timer. (Your |
| previous settings are saved.) |
3If you selected Program in step 2, press V and v to set the day(s), hour, minute, duration, and channel number. Press
or press b to confirm each setting and move to the next setting.
Press B to go back to the previous setting.
4Press MENU to exit the menu screen. An LED on the front panel will light, indicating the Timer has been set.
Current Time You can set the current time.
1Press 
to select Current Time.
2Press V and v to set the current time (day, hour, minute,
and AM/PM). Press 
(or press b) to confirm each setting and move to the next setting. Press B to go back the previous setting.
3Press MENU to exit the menu screen.
Diagnostics Display diagnostics information about the TV. This can be useful in providing information to an authorized technician or repair person.
CableCARD This list of selectable CableCARD options will vary, depending on your cable service provider.
116