Other Information
General
Problem | Possible Remedies |
How to reset TV to factory | ❏ Turn on the TV. While holding down the RESET button on the remote control, |
settings | press the POWER button on the TV. (The TV will turn itself off, then back on |
| again.) Release the RESET button. |
|
|
How to restore Video settings | ❏ Press RESET on the remote control while in the Video menu (see page 98). |
to factory settings |
|
|
|
How to restore Audio settings | ❏ Press RESET on the remote control while in the Audio menu (see page 102). |
to factory settings |
|
|
|
Cannot cycle through the other | ❏ Be sure the Label Video Inputs option is not set to Skip (see page 113). |
video equipment connected to |
|
the LCD projection TV |
|
|
|
Cannot operate Menu | ❏ If a menu option appears in gray, this indicates that the menu option is not |
| available. |
|
|
Lost password | ❏ In the password screen (see page 108), enter the following master password: |
| 4357. The master password clears your previous password; it cannot be used to |
| temporarily unblock channels. |
|
|
TIMER/STANDBY LED on | ❏ The LED (see page 24 or 126) blinks when the TV is turned on, then shuts off |
front panel is lit | when the picture is displayed. If the LED blinks continuously, this may indicate |
| the TV needs service. When lit, indicates that the timer is set (see page 24 or 126). |
| When the timer is set, this LED will remain lit even when the TV is turned off. |
|
|
Digital cable box does not work | ❏ If you are connecting a VCR and digital cable box using a splitter, as described on |
| page 41, you must use a special |
| with your digital cable box. Contact your cable provider for details. |
|
|
Cannot record digital channels | ❏ Only analog channels can be recorded to your VCR. |
to VCR |
|
|
|
The replacement lamp does not | ❏ The screw of the lamp cover may be slanted. Take out the screw, insert it straight |
light up | into the screw hole, and then tighten it completely (see page 19 for |
| series, see page 22 for |
|
|
TV cabinet creaks | ❏ When the TV is in use, there is a natural rise in temperature, causing the cabinet to |
| expand or contract and may be accompanied by a slight creaking noise. This is not |
| a malfunction. |
|
|
Information Other
125