Be careful not to pinch your fingers when opening the cover.
2
/
– Input select/OK
•In TV mode (page 23): Selects the input source from equipment connected to the TV sockets.
•In TV menu: Selects the menu or option, and confirms the setting.
32 
/
•In TV mode: Increases (+) or decreases
•In TV menu: Moves through the options right (
) or left (
).
4PROG 
/
•In TV mode: Selects the next (+) or previous
•In TV menu: Moves through the options up (
) or down (
).
5
– Timer REC programme/Timer indicator
•Lights up in orange when the Timer recording is set (page 20, 21). Lights up in red when the recording starts.
•Lights up in orange when the timer is set (page 31).
6
– Lamp indicator
Flashes in red when the lamp for the light source has burned out.
3
#
3
#
MENU
71 – On/standby indicator
Flashes in green when the light source is preparing to turn on. Lights up in green when the TV is switched on.
Lights up in red when the TV is in standby mode. If the lamp cover or the lamp itself is not securely attached, the red indicator will continue to flash in intervals of three blinks at a time (page 49).
8Remote control sensor
•Receives IR signals from the remote.
•Do not put anything over the sensor, as its function may be affected.
91 – Power
Switches the TV on or off.
Note
Make sure that the TV is completely switched off before unplugging the mains lead. Unplugging the mains lead while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction.
Continued