To connect

Do this

 

Digital audio

Connect to the DIGITAL OUT

(PCM) component

(OPTICAL) socket using the

K

Optical audio cable.

 

Note

 

 

The DIGITAL OUT (OPTICAL)

 

socket only supports digital terrestrial

 

signals.

 

 

 

 

Hi-Fi audio

Connect to the audio output

equipment L

sockets

 

to listen to the sound

 

 

from the TV on Hi-Fi audio

 

equipment.

 

 

 

 

 

Programming the remote

This remote is preset to operate Sony TVs, most Sony DVDs, VCRs and AMPs (Home Theatre, etc.).

To control VCRs and DVDs of other manufacturers (and some other Sony VCR, DVD and AMP models), do the following procedure to programme the remote.

Note

Before you start, look up the three-digit code for your brand of DVD, VCR or AMP from the “Manufacturer’s codes” on page 46.

1

 

2

 

 

Using

1

Optional

 

3

Equipment

 

1 Press and hold the DVD, VCR or AMP

 

function button you want to programme on

 

the remote, then press , keeping the

 

function button pressed down.

 

The selected function button (DVD, VCR or

 

AMP) will flash.

 

2 Press the number buttons to enter the

 

three-digit manufacturer’s code number

 

while the button is lit. If code is not entered

 

within 10 seconds, you must perform the

 

step 1 again.

 

3 Press .

 

When the programming is correct, the selected

 

function button will flash twice, and when not, it

 

will flash five times.

 

Continued

45 GB