Technical Set-up

Displays the Technical Set-up menu.

“Auto Service Update”: Enables the TV to detect and store new digital services as they become available.

“Software Download”: Enables the TV to automatically receive software updates free through your existing aerial (when issued). It is recommended that this option be set to “On” at all times. If you do not want your software to be updated, set this option to “Off”.

“System Information”: Displays the current software version and the signal level.

“Time Zone”: Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country.

CA Module Set-up

Allows you to access a Pay Per View service once you obtain a Conditional Access Module (CAM) and a view card. See page 43 for the location of the (PCMCIA) socket.

Notes

•CAM is not supported in all countries. Check with your authorized dealer.

•“CA Module Set-up” is available only when a CAM is inserted.

Digital Tuning

Displays the “Digital Tuning” menu.

Digital Auto Tuning

Tunes in all the available digital channels.

Usually you do not need to do this operation because the channels were already tuned when the TV was first installed (page 8). However, this option allows you to repeat the process (e.g. to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).

Programme List Edit

Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV.

1Press F/f to select the channel you want to remove or move to a new position.

If you know the programme number

Press the number buttons to enter the three-digit programme number of the broadcast you want.

2Remove or change the order of the digital channels as follows:

To remove the digital channel

Press . A message that confirms whether the selected digital channel is to be deleted appears. Press G to select “Yes”, then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the channel and press G. Repeat the procedure in steps 1 and 2 to move other channels if required.

3Press RETURN.

Digital Manual Tuning

Tunes the digital channels manually.

1Press the number button to select the channel number you want to manually tune, then press F/f to tune the channel.

2When the available channels are found, press F/f to select the channel you want to store, then press .

3Press F/f to select the programme number where you want to store the new channel, then press .

Repeat the above procedure to manually tune other channels.

40 GB