6 Pull out the lamp.

Hold the indented grooves of the lamp as shown, and pull the lamp straight out.

If the lamp is hard to remove, pull the right side of the lamp for additional traction (KDS-55A2000).

KDS-55A2000

Hold this part of the lamp

KDS-70R2000

Hold this part of the lamp

Notes

•Do not touch the inside of the lamp compartment.

•The lamp is very hot immediately after use. Never touch the glass portion of the lamp or the surrounding parts.

•After the used lamp has cooled, place it into the empty box of the replacement lamp. Never put the used lamp into a plastic bag.

7 Put the new lamp into its place.

Make sure the lamp is securely mounted into the compartment. Failure to do so may cause a fire or the screen to go dark.

KDS-55A2000

KDS-70R2000

Notes

•The lamp compartment is tilted.

•If the lamp is not securely reattached, the self- diagnostic function may be triggered and 1 flashes in red three times (page 15).

KDS-55A2000 KDS-70R2000

8 Reattach the lamp door.

For KDS-55A2000, replace the door by inserting the two tabs in the slot from the left side. Slide the lever to the right and then turn the screw clockwise to secure the door.

For KDS-70R2000, turn the knob to the right while pushing the door in, until the marks on the lid and the case line up. Then turn the screw clockwise to secure the door.

KDS-55A2000

KDS-70R2000 Additional

Information

Continued

49 GB