Sony KDS-R50XBR1, KDS-R60XBR1 Indicators, Projection Lamp

Introducing the TV

Indicators

Screen

Indicators

The indicators show the current status of your TV. If there is a change in the condition or a problem with the TV, the indicators will flash or light up in the manner described below to let you know that it requires your attention.

Indicator		Flashing because...
POWER/	Green	The lamp for the light source is preparing to turn
STANDBY		on. When it is ready, it turns on.
flashing
	Red	The lamp door or the lamp is not securely attached.
		The red indicator will continue to flash in intervals
		of three blinks at a time until the lamp door or the
		lamp is placed correctly.
		The red indicator is on when i.LINK STANDBY is
		on or when your TV is in the PC power saving
		mode.
LAMP indicator	The projection lamp has burned out. Replace it with new one
flashes	(see page 104).

TIMER indicator When one of the timers is set the indicator will remain lit (will

is lit not flash) even when the TV is turned off.

Projection Lamp

How to replace the lamp,

see page 104.

Your TV uses a projection lamp as its light source. As with any lamp, it has limited life and needs to be replaced when the Lamp indicator flashes or the screen becomes darker. Note the following:

❑After turning on your TV, it may take a while (1 minute or less) before the picture appears.

❑When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-5100 replacement lamp (not supplied).

✍The light emitted from the lamp is quite bright when your TV is in use. To avoid eye discomfort or injury, do not look into the light housing when the power is on.

12