Watching the TV
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Function | Equipment | Programmable Code |
|
| Number |
DVD/VCR | Sony Dream System | 751 |
|
|
|
SAT/CABLE | Sony Satellite Receiver | 801 |
|
|
|
i.LINK | Sony DVD player (i.LINK) | 901 |
|
|
|
3 | If you have video equipment other than Sony brand that you want to control | ||
2 | with the TV’s remote control, use the following procedure to program the | ||
| remote control. |
| |
|
| ||
| ✍ The equipment must have infrared (IR) remote capability in order to | ||
|
| be used with the remote control. | |
4 |
|
| |
1 | Turn to the list of “Manufacturer’s Codes” on page 49, and find the | ||
|
| ||
5 | 2 | more than one code number is listed, use the number listed first.) | |
Press FUNCTION | repeatedly until the DVD/VCR, SAT/CABLE or i.LINK | ||
| 3 | indicator lights up. | |
| Press SAT/CABLE for five seconds until the indicator of the selected input | ||
| 4 | flashes. |
|
| While the desired indicator is flashing, enter the | ||
| 5 | manufacturer’s code number. | |
| Press | . | |
✍You must do step 5 within 10 seconds of step 4, or you must redo steps 4 through 5.
To check if the code number works
Aim the TV’s remote control at the equipment and press SAT/CABLE that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.
✍If no code is input within the above specified time, or an invalid or incorrect code number is input, the remote control automatically goes back to the previous setting.
✍In some cases, you may not be able to program your remote control to operate other equipment. In such cases, use the equipment’s own remote control.
✍Removing the batteries or using dead batteries may cause the programmed codes to be lost and revert back to the factory setting. Reprogramming the codes may be necessary.
48