Using the Settings
Selecting PC Setup Options
zWhen there is no signal input, settings for the PC Setup options except Power Management cannot be changed.
To display the PC screen:
❑See “Using the PC Input” on page 60.
Setup
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Adjust PC setup options
Resolution − − − x − − − / − − Hz
MENU Exit
zA warning message will appear before switching to the power saving mode.
The PC Input Setup setting includes the following options:
Option | Description |
|
|
|
| |
Auto | Select to automatically adjust the display position of the picture |
|
| |||
Adjustment | when the TV receives an input signal from the connected PC. |
|
| |||
| Note that Auto Adjustment may not work well with certain |
|
| |||
| input signals. In such cases, manually adjust the options below. |
|
| |||
|
|
| ||||
|
|
|
| |||
Phase | Select to adjust the phase when the screen flickers. | Using | ||||
|
|
|
| |||
Pitch | Select to adjust the pitch when the picture has unwanted | |||||
|
| |||||
| vertical stripes. |
|
| the | ||
|
|
|
| |||
Horizontal | Select to adjust the horizontal position of the picture. | |||||
Settings | ||||||
Center | Allows you to move the picture left and right in the window. | |||||
|
| |||||
| Press B or b and press | to choose a correction between +63 and |
|
| ||
|
|
|
| |||
Vertical Center | Select to adjust the vertical position of the picture. |
|
| |||
| Allows you to move the picture up and down in the window. |
|
| |||
| Press B or b and press | to choose a correction between +63 and |
|
| ||
|
|
|
|
| ||
Wide Mode | Normal | Select to display the picture in its original size. |
|
| ||
|
|
|
|
| ||
| Full 1 | Select to enlarge the picture to fill the display area, |
|
| ||
|
| keeping its original |
|
| ||
|
|
|
|
| ||
| Full 2 | Select to enlarge the picture to fill the display area. |
|
| ||
✍A black frame will appear on the surrounding of the picture.
✍When using SXGA signals and Wide Mode is set to Normal, the top and bottom of the picture will be cropped. When it is set to either Full 1 or Full 2 with SXGA signals, the picture will appear in reduced size.
Power | On | Select to automatically switch to the power |
Management |
| saving mode when there is no signal input for |
10minutes.
✍POWER/STANDBY LED will light up in red when your TV is in the power saving mode.
| Off | Select to turn off Power Management. |
Reset | Select to restore the factory default settings. | |
(Continued)
99