Introducing the TV
TV Controls and Connectors
Front Panel
CHANNEL
3
#
VOLUME
3
#
TV/VIDEO
POWER/STANDBY
| POWER | MENU |
TIMER LAMP |
| |
|
|
1 2 3 4 5
ItemDescription
6
7
8
9
0
1POWER/ STANDBY LED
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may indicate the display unit needs servicing (see “Contacting Sony” on page 2). When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is not securely attached (see page 106). The red indicator is on when i.LINK STANDBY is on or when your TV is in the PC power saving mode.
2TIMER LED When lit, indicates one of the timers is set. When it is set, this LED will remain lit even if the TV is turned off. For details, see page 101.
3LAMP LED Lights up in red when the lamp for the light source has burned out. For details, see “Replacing the Lamp” on page 104.
4(IR) Infrared Receives IR signals from the remote control.
| Receiver | Do not put anything near the sensor, as its function may be affected. |
5 | POWER | Press to turn on and off the TV. |
|
|
|
6 | Speaker | Outputs audio signal. |
7CHANNEL +/– Press to scan through channels. To scan quickly through channels, press and hold either
–or +.
8VOLUME +/– Press to adjust the volume.
9 |
| Press to confirm the selection or setting. |
| TV/VIDEO | Press repeatedly to cycle through the video equipment connected to the TV’s video inputs. |
|
|
|
q; | MENU | Press to display the TV |
|
| again to exit the TV |
|
| CHANNEL +/– buttons. |
✍The CHANNEL + button has a tactile dot. Use the tactile dot as a reference when operating the TV.
16