Using i.LINK

i.LINK Setup

You can use the i.LINK Control Panel to access digital setup options, some of which are also available through the Program Guide (described on page 52).

To set up the selected device:

Press V v B b to highlight Setup and press .

i.LINK Control Panel

Back to Device List

Alternate Video

Power

Setup

Alternate Audio

Swap Audio

 

Analog Video

Full Screen

888.888

Sony DV-VCR

The following options are displayed:

Option

Description

 

 

Alternate

Each program has a main video stream (the video that you see

Video

when the channel is first tuned), and may have alternate video

(when available)

streams. This option allows you to switch among these alternate

 

video streams.

 

 

 

Alternate

Each program has a main audio stream (the audio that you hear

Audio

when the channel is first tuned), and may have alternate audio

(when available)

streams. This option allows you to switch among these alternate

 

audio streams (e.g., for different languages).

 

 

Analog Video

The TV is able to accept an analog signal from a selected set-top

 

box. The set-top box must be EIA-775A compliant and must be

 

connected to the TV’s VIDEO 3 input. To associate the device

 

with the TV’s analog VIDEO 3 input, press V or v to select

 

Analog Video and press

. All EIA-775A-compliant devices

 

will be shown in the list. Select the desired device from the list

 

and press

.

 

 

 

 

 

Notes on i.LINK

❑The TV can act as an i.LINK repeater, so that i.LINK signals are relayed to another device even when the TV is powered off. To enable this feature, set the i.LINK Standby option to On using the Setup setting as described on page 97.

❑Parental Lock settings apply to the signal from a selected device. For more details, see page 92.

78