Connecting the TV

DVD Player with

S VIDEO and Audio Connectors

Use this hookup if:

❑Your DVD player does not have component (YPBPR) jacks.

Disconnect all power sources before making any connections.

1 Use an A/V cable to connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks.

2 Use an S VIDEO cable to connect the DVD player’s S VIDEO jack to the TV’s S VIDEO jack.

DVD player

Rear of TV

S VIDEO

S VIDEO cable

AUDIO-R VIDEO

AUDIO-L

Cables are often

color-coded to connectors. Connect red to red, white to white, etc.

A/V cable

✍If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

✍To watch the DVD, press TV/VIDEO repeatedly to select the DVD input (VIDEO 1 in the illustration). If you have a non-Sony DVD player and want to set up the TV remote control to operate it, you must program the remote control. See “Programming the Remote Control” on page 48.

✍To control DVD functions with the TV remote control, See “Operating a DVD Player” on page 50.

✍To easily identify equipment connected to the TV, see “Label Video Inputs” on page 96.

40