Installing and Connecting the Projection TV

Connecting a Satellite Receiver with a VCR

Disconnect all power sources before making any connections.

1

2

3

Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.

Connect the CATV cable to the VCR’s VHF/UHF IN jack.

Using a coaxial cable, connect the VCR’s OUT jack to the projection TV’s VHF/UHF jack.

4 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks.

5 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.

Rear of projection TV

Satellite receiver

Coaxial cable

Satellite antenna cable

YC-15V/30V

 

VMC-810S/

(not supplied)

 

 

 

 

820S (not

 

 

 

 

 

supplied)

AUDIO-R (red)

S VIDEO

AUDIO-L (white)

 

VIDEO (yellow)

VCR

Cable

VMC-810S/820S

 

 

 

YC-15V/30V (not supplied)

(not supplied)

 

 

 

 

 

 

 

✍Be sure your VCR’s video input is set correctly. Consult your VCR’s operating manual for instructions.

✍Use TV/VIDEO to select

-VIDEO 1 to watch satellite TV or the VCR (your VCR must be turned on).

-VHF/UHF to watch cable TV.

✍If your VCR or satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

24