Using the Features

Watching the TV

 

Many TV features can be accessed directly through the remote control. The

 

following will explain the function of some of the buttons found on your

 

remote control.

Buttons for

1 TV (FUNCTION)

Projection TV

Activates the remote control for use with the projection TV.

Operations

2 ANT— (AUX input)

 

 

Press to change between the VHF/UHF input and the AUX input.

 

3 TV (POWER)

 

Turns the projection TV on and off. If a video input indication (e.g.,

 

VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/ – until

 

a channel number appears.

 

4 0-9 and ENTER

 

Use for direct channel selection. Press 0-9to select a channel (for example,

 

to select channel 10, press 1 and 0). The channel will change after 2 seconds,

 

or you can press ENTER for immediate selection.

 

5 CH +/–

 

Press to scan through the channels (+ up or – down).

 

6 VOL +/–

 

Press to adjust the volume (+ up or – down).

 

7 JUMP

 

Press to alternate or jump back and forth between two channels. The

 

projection TV will jump between the current channel and the last channel

 

selected.

 

8 MUTING

 

Press to mute the sound. “MUTING” will appear on the screen and will dim

 

three seconds later. To restore the sound, press again or press VOL +.

 

9 FREEZE — (yellow labeled button)

 

This is useful when you need to copy down information that appears on the

 

TV’s screen (see “Using the Freeze Function” on page 47).

 

q; SLEEP

 

Press repeatedly until the projection TV displays the approximate time in

 

minutes (15, 30, 45, 60, or 90) that you want the projection TV to remain on

 

before shutting off automatically.

 

Cancel by pressing SLEEP until “Sleep Off” appears or turning the power

 

off.

40