Introducing the Sony Projection TV

❑Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in wide screen mode (16:9 aspect ratio).

❑Auto Wide: Allows you to select the wide screen mode automatically.

❑Flash Focus™: Allows you to adjust convergence automatically.

❑Manual Convergence: Allows you to manually adjust the convergence of specific areas of the screen.

❑Digital Visual Interface (DVI): Can accommodate a copyprotected digital connection (HDCP*) to other devices (such as digital set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not intended for use with personal computers.

Using this manual

We recommend that you carefully review the contents of the following three sections in the order shown to ensure that you fully understand the operation of your new projection TV.

1Installing and Connecting the Projection TV

This section guides you through your initial setup. It shows you how to install your projection TV, to connect your new components and to connect the antenna and cable.

2Using the Features

This section shows you how to begin using your new projection TV. It also shows you how to use your remote control functions.

3Using the menus

This section teaches you how to access on-screen menus and adjust your projection TV settings.

Instructions in this manual are written for the remote control. Similar controls are also found on the projection TV console.

* High-bandwidth Digital Content Protection

TV Projection Sony the Introducing

9