Installing and Connecting the Projection TV
Adjusting the Convergence Manually
zFor details on using the Setup Menu, see page 61.
The Manual Convergence feature gives you more control over the TV's picture than the Flash Focus feature, allowing you to
✍Before using Manual Convergence, you must first perform Flash Focus (as described on page 33).
✍Use the joystick of your remote control to perform the steps below.
1 Press MENU to display the Menu.
2 Move the joystick B or b to highlight the Setup icon and press 
. 3 Move the joystick to highlight Convergence and press 
.
A pattern of white crosses appears, with a yellow 
around one of the
crosses. Aligned crosses (which do not need adjustment) look white and have little or no red or blue showing. Crosses that are not aligned show red or blue shades beyond their edges.
-
Full/Normal
Move< < <
<
Select: | End: menu |
✍You can scroll up and down through the 9 x 7 field of crosses to manually converge all portions of the screen.
4
5 | If the cross that you selected has red edges, move the joystick until the | |||||||||
| red image is replaced with a white cross. Once you have finished this (or | |||||||||
6 | the cross does not have red edges), press | . The |
|
|
| changes to blue. | ||||
|
|
| ||||||||
|
| |||||||||
If the cross you selected has blue edges, move the joystick until the blue | ||||||||||
| image is replaced with a white cross. Once you have finished this, press | |||||||||
| . The |
|
|
| changes to yellow again. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||
7 Repeat steps 4 to 6 to adjust other crosses. When finished, press MENU to exit the manual convergence screen and the Setup menu.
34