Installing and Connecting the Projection TV
Connecting an AV Receiver
zYou can connect an AV receiver using both composite video and S VIDEO. If both are connected, then the TV will detect and display an S VIDEO signal. To take advantage of this feature, connect your receiver with Video 1.
For greater control of all audio and video equipment, connect an AV receiver.
✍Change “Video Label” for the VIDEO 1 input to “Receiver” (see page 62).
Disconnect all power sources before making any connections.
1 Connect the coaxial cable from the incoming cable connection or antenna to IN on the VCR.
2 Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the projection TV.
3 Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the projection TV to MONITOR OUT on the AV receiver.
4 Using an AUDIO/VIDEO cable, connect TV OUT on the projection TV to AUDIO/VIDEO 2 IN on the AV receiver.
5 Using an AUDIO/VIDEO cable, connect the video equipment to the AV receiver.
6 Select the Setup menu and set “Video Label” to “Receiver” to fix your TV’s input to AV receiver (see “Video Label” on page 62).
| Coaxial cable (not supplied) | ||
Rear of projection TV | (not supplied) | ||
| |||
|
|
VCR
S VIDEO | VIDEO | VIDEO |
| Cable/ | |
|
|
|
| ||
|
|
|
|
| Antenna |
|
|
|
|
| |
|
|
| (not supplied) |
|
|
|
|
|
| ||
|
|
| AUDIO/ |
| AUDIO/ |
|
|
| VIDEO 2 IN |
| |
|
|
|
| VIDEO 1 IN | |
|
| MONITOR |
|
| |
|
|
|
|
| |
|
|
| OUT |
|
|
|
| Optional S VIDEO cable |
| AV receiver | AUDIO/VIDEO 1 OUT |
|
|
| |||
|
|
|
| ||
30