Using the Features

Button

Description

qd POWER

Turn on and off the projection TV and other audio/video

buttons

equipment you have programmed into the remote control.

(GREEN)

For instructions, see “Programming the Remote Control”

 

on page 71.

 

 

qf FUNCTION

Select the equipment (TV, SAT/CABLE) that you want to

buttons

operate. The indicator lights up momentarily when pushed

 

to show which device the remote control is operating.

 

 

qg TV/VIDEO

Cycles through the video equipment connected to your

 

projection TV’s video inputs: TV, VIDEO 1, VIDEO 2,

 

VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7.

 

 

qh 0 – 9 and

Press 0 - 9 to select a channel, the channel changes after 2

ENTER

seconds. Press ENTER to select immediately.

 

 

qj

Turns on/off Twin View. For details, see “Using Twin

 

View™” on page 44.

GUIDE

Displays the program guide of your satellite.

 

 

qk MENU

Press to display the projection TV on-screen menu. Press

 

again to exit from the menu.

 

 

ql CH +/–

Scan through channels.

 

 

w; DRC/

Press repeatedly to step through the available high-

CINEMOTION

resolution picture modes: Interlaced, Progressive and

 

CineMotion. For details, see “Using the Video Menu” on

 

page 52.

 

 

wa WIDE MODE

Press to step through the wide screen modes: Wide Zoom,

 

Normal, Full and Zoom. For details, see “Using Wide

 

Mode” on page 50.

 

 

zTo scan rapidly through the channels, press and hold down CH+ or CH–.

38