Sony KV-T29SN81 service manual Item Number 00

KV-T29SN81

RM-870

4-3. A BOARD ADJUSTMENT AFTER IC003	4-4. PICTURE DISTORTION ADJUSTMENT
(MEMORY) REPLACEMENT	Item Number 00 – 08

1. Enter to Service Mode.

00 HSF (H SHIFT)

2.Press commander buttons [5] and [0] (Data Initialize), and [2] and [0] (Data Copy) to initialize the data.

3.Call each item number, and check if the respective screen shows the normal picture.

In case some items are not well-adjusted, give them fine adjustment.

Write the data per each item number ([MUTING] + [0]).

4.Select item numbers “49” (OP0), “4A” (OP1) and "4B" (OP2) respectively set the bit per model with command buttons [3] and [6].

5.Press commander buttons [8] and [0] (Test Normal) to return to the data that was set on the shipment from the factory.

(= Cancel Service Mode.)

01 HSZ (H SIZE)

02PAP (PIN AMPLITUDE)

03CNP (CORNER PIN)

04 TLT (TILT)

05 VSL (V SLOPE)

06VAP (V AMPLITUDE)

07SCR (S CORRECTION)

08VSF (V SHIFT)

– 23 –