– 10 –
Additional Information
Troubleshooting
If you have any problems, read this manual again and check the countermeasure for each of the symptoms listed below.
If the problem persists, contact your nearest authorized service center or dealer.
Snowy picture
Noisy sound
/Check the antenna.
/Check the antenna connection on the TV and on the wall.
Dotted lines or stripes
/This may be caused by local interference (e.g. cars, neon signs and hair dryers). Adjust the antenna for minimum interference.
Double images or “ghosts”
/This may be caused by reflections from nearby mountains or buildings. A highly directional antenna may improve the picture.
Notes
∙When you switch on the TV, you may hear the “boon” sound that is caused by the demagnetization of the TV. This does not indicate a malfunction.
∙The picture color may become abnormal if you change the direction of your TV. To obtain the normal picture color , press POWER on the TV to switch off the TV for five minutes and then switch it on again.
12 Additional Information
No picture
No sound
/Press POWER.
/Check the antenna connection.
/Check the VCR connections.
/Check the power cord connection.
/Check the standby mode.
Good picture
No sound
/Press VOLUME +.
/Press MUTING.
/Press A/B/ENLARGE
No color
/Adjust the COLOR level in the
/Check the COLOR SYSTEM setting.
TV cabinet creaks
/Even if the picture or the sound is normal, changes in the room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.
Note on the remote commander
∙The supplied remote commander is used on several models of the TV. If you do not find instructions for some controls that are on the remote commander, that means your TV does not employ the features of those controls, e.g. TEXT.
Note on the TV SYSTEM button
∙The TV SYSTEM button is not used on your TV.
WARNING
Do not install the appliance in a confined space, such as a bookcase or
