Sony KZ-32TS1E, KZ-42TS1E Cool, Warm, Mode, Live, User1, User2, User3, Reset, Colour, Colour, On/Off, On/Off, Red Gain, Standard, Sharpness, Blue Gain, Name Set:, Cancel/OK

Colour	Press	/	to decrease colour intensity.
	Press	/	to increase colour intensity.

Colour cannot be adjusted for the RGB input.

Sharpness	Press	/	to soften the picture.
	Press		to sharpen the picture.
		/
NR (Noise	Off/Low/Mid/High
Reduction)	Select to reduce the noise level of all connected equipment. It is
	most effective on the signal from the VHF/UHF jack.

You cannot adjust NR (Noise Reduction) for equipment connected to the RGB input.

Dynamic Pict	On/Off
	Select to enhance the picture contrast.
Colour Tone	Cool/Normal/Warm/User1/User2/User3
	Select to give bright colours a red tint (Setting is variable from Cool
	to Warm).
	Select User1, User2, or User3 to customise the Colour Tone by
	adjusting Red Gain, Green Gain, and Blue Gain (tint), and store
	them in memory.
	Name Set: Select to name your personal settings. Press									/	/
			/		to select the letter, then press OK. Finally press
				/		/		or	to select the word “End” on the
	screen and
							press OK to store.
	• To correct the letter, select on the screen to go
		back and press OK.							on the screen and press OK.
	• For a blank, select
Colour Correct	On/Off

Select to emphasise reds and blues.

Colour Correct cannot be adjusted for the RGB input.

Gamma Correct	High/Mid/Low
	Select to adjust the balance between bright and dark areas of the
	picture.
Reset	Cancel/OK
	Select OK to reset the picture to the factory preset levels.

Each option cannot be adjusted when Mode is set to Live or Standard.

14Menu System