Sony KZ-32TS1E, KZ-42TS1E Symbol, Input Signals, For Mono Equipment

Using Optional Equipment

1

2

Connect your equipment to the designated TV socket, as indicated on page 28.

Switch on the connected equipment.

3 To watch the picture of the connected equipment, press the button repeatedly until the correct input symbol appears on the screen.

Symbol						Input Signals
		1 or				2 • Audio / video input signal through the Scart connector A.
						• RGB input signal through the Scart connector A. This symbol appears only if
						a RGB source has been connected.
		3				• Audio / video input signal through the Scart connector B.
			3			• S Video input signal through the Scart connector B.
	S
		4				• Video input signal through the phono socket Dand Audio input signal
						through C.
			4			• S Video input signal through the S Video input jack Eand Audio signal
	S
						through C.
5						• RGB input signal through the Y/G, PB/CB/B, PR/CR/R jacks and HD, VD
						jacks H, and Audio input signal through G.
				• If your equipment is connected to the Scart connector			3/	S , or	4/	S 4, or
						5 jacks, select the input signal format for the connected equipment by using “AV3
					Input,” “AV4 Input,” or “AV5 Input” option in the “Features” menu (page 20).

•If your equipment is connected to the 5 jacks and outputs an RGB signal, select RGB Mode in the “Features” menu (page 20).

4 Press the button on the remote control to return to the normal TV picture.

For Mono Equipment
Connect the phono plug to the L/G/S/I socket and select	4 or S 4 input signal using the

instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual Sound” “A” on the sound menu screen.

30Additional Information