AV3 Output The “AV3 Output” option allows you to select the source to be
output from the Scart connector 3/ S . You can record from this Scart any signal coming from the TV or from external equipment connected to the other Scart connectors.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
After selecting the option, press . Then press or to select the desired output signal: Auto, TV, AV1, AV2, or AV4.
•If you select Auto, the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart 3/ S or to a VCR connected to this Scart, please remember to change back the “AV3 Output” to Auto for correct unscrambling.
•When AV3 Output is set to Auto, the signal input through the AV5 input and the RGB signal are not output from the
| Scart connector |
| 3/ |
|
| S . | |||||
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| ||
AV3 Input/ | The “AV3 Input,”“AV4 Input,” and “AV5 Input” options allow | ||||||||||
AV4 Input/ | you to select which jack the TV receives the input signal from; | ||||||||||
AV5 Input | Video or S Video for AV3 Input and AV4 Input, and Component or | ||||||||||
| RGB for AV5 input. |
|
|
|
|
|
|
|
|
|
|
| To do this: |
|
|
|
|
| . Then press |
| or |
| to select |
| After selecting the option, press |
|
|
|
|
| |||||
| the desired jack and finally press OK to store. |
|
| ||||||||
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||
RGB Mode | Select the “RGB Mode” option if equipment which outputs RGB | ||||||||||
| signal is connected to the Y/G, PB/CB/B, PR/CR/R jacks of the | ||||||||||
| 5. |
|
|
|
|
|
|
|
|
|
|
To do this:
After selecting the option, press. Then press or to select the connected equipment:
DTV for a digital tuner with RGB signal, or Others for other RGB equipment.
DTV is the digital broadcast format standardised in the United States, and there are several signal formats, such as 480i, 575i, 480p, 575p, 720p, or 1080i.
20Menu System