B)Label a channel using up to five characters.

To do this:

Highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the

screen, select the Label option and press . Next press / // to select the letter, then press OK. Finally press // or to select the word “End” on the screen and

press OK to store.

•To correct the letter, select on the screen to go back and press OK.

•For a blank, select on the screen and press OK.

C)Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture if the picture is distorted.

To do this:

Whilst watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press

or to adjust the fine tuning between -15 and +15 and press OK.With the Confirm option highlighted, press OK. Next

press to select OK and finally press OK to store.

D)Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.

To do this:

Highlighting the Programme option, press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Next press or to select Yes and press OK. With the Confirm option highlighted, press OK. Next press to select OK and finally press OK to store.

To cancel this function afterwards, select No instead of Yes in the step above.

E)View and record scrambled channels when using a decoder

connected to the Scart

 

3/

 

S

either directly or via a

 

 

 

 

 

 

VCR.

 

 

 

 

 

 

 

 

This option is only available depending on the country

 

 

you have selected in the “Language/Country” menu.

 

 

To do this:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select the Decoder option and press

. Next press

or

to

GB

select On and press OK. With the Confirm option highlighted, press OK. Next press to select OK and finally press OK to store.

To cancel this function afterwards, select Off instead of On in the step above.

Menu System 23