Sony KZ-32TS1E, KZ-42TS1E Connecting a VCR:, Connecting a VCR that supports Smartlink:, If you have connected a decoder to the Scart, S or through a VCR, connected to this Scart:

R/D/D/D L/G/S/I	R/D/D/D L/G/S/I
		CTRL S
R/D/D/D L/G/S/I		AC IN
	Y/G PB/CB/B PR/CR/R HD	VD
		(W/G/W/G)

(SMARTLINK)

To avoid noisy picture, do not connect external equipment to connectors Dand

Eat the same time.

Connecting a VCR:

To connect a VCR, please refer to the section “Connecting the Aerial and VCR” on page 8 of this instruction manual. We recommend you connect your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual Programme Preset” option. (for details of how to manually programme these presets, see page 22, step A).

Refer to your VCR instruction manual to find out how to find the output channel of your VCR.

Connecting a VCR that supports Smartlink:

Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please refer to the instruction manual of your VCR.

If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to

the Scart 3/ S B.

If you have connected a decoder to the Scart	3/	S or through a VCR
connected to this Scart:

Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the

“Decoder*” option, select “On” (by using or ). Repeat this option for each scrambled signal.

*This option is only available depending on the country you have selected in the “Language/ Country” menu.

Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets Fif you wish to amplify the audio
output from TV. Next, using the menu system, select the “Features” menu and set “TV
	GB
Speakers” to “Off.”
For a sub woofer
Plug in your sub woofer to the 5 W/G/W/G output jack Iusing a monaural audio cable.

Additional Information 29