Sony MDS-JE480 Fading in and fading out, Falling asleep to music, 25GB, Other Functions, Fade-inRecording, Fade-outRecording

While the deck is stopped or playing, press MENU/NO.

Other Functions

Fading in and fading out

Fade-in Recording gradually increases the signal level at the start of recording. Fade-out Recording gradually decreases the signal level at the end of recording.

Fade-in Recording

During recording pause, press FADER on the remote.

“b” flashes in the display and the deck performs Fade-in Recording for five seconds (factory setting) until the counter reaches “0.0s.”

Fade-out Recording

During recording, press FADER on the remote.

“B” flashes in the display and the deck performs Fade-out Recording for five seconds (factory setting) until the counter reaches “0.0s,” then pauses.

Tip

Do the following procedure to specify the fade-in or fade-out duration for recording.

1While the deck is stopped or playing, or paused, press MENU/NO.

2Turn AMS (or press ./> repeatedly) until “Setup?” appears, then press PUSH ENTER or YES.

3Turn AMS (or press ./> repeatedly) to select the setting, then press PUSH ENTER or YES.

To change the	Select
duration of
Fade-in Recording	F.in
Fade-out Recording	F.out

4Turn AMS (or press ./> repeatedly) to select the duration, then press PUSH ENTER or YES.

Both the Fade-in and Fade-out durations can be set in 0.1 second steps.

5Press MENU/NO.

Falling asleep to music

—Sleep Timer

You can set the deck so that it turns off automatically after a specified duration.

1

2 Turn AMS (or press ./> repeatedly) until “Setup?” appears, then press PUSH ENTER or YES.

3 Turn AMS (or press ./> repeatedly) until “Sleep Off” appears in the display, then press PUSH ENTER or YES.

4 Turn AMS (or press ./> repeatedly) to select the setting, then press PUSH ENTER or YES.

To	Select
Turn on Sleep Timer	Sleep On1)
Turn off Sleep Timer	Sleep Off (factory setting)

1)The deck turns off automatically after 60 minutes.

5 Press MENU/NO.

Tip

You can check the remaining time.

Once you turn on Sleep Timer, the remaining time is displayed when you select “Sleep” in Setup Menu.

25GB