3 Turn AMS (or press ./> repeatedly) until the number of the track (when erasing the track name) or “Disc” (when erasing the disc name) flashes, then press PUSH ENTER or YES.
“Complete!” appears.
Changing the recorded level after recording
—S.F EDIT
You can change the volume of recorded tracks using S.F (Scale Factor) Edit. The original track is recorded over at the new recording level. When changing the recording level, you can select
Changing the overall recording level
1 While the deck is stopped, playing, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “S.F Edit?” appears, then press PUSH ENTER or YES.
3 Turn AMS (or press ./> repeatedly) until “Tr Level?” appears, then press PUSH ENTER or YES.
4 Turn AMS (or press ./> repeatedly) until the track number you want to change the recording level appears, then press PUSH ENTER or YES.
5 While monitoring the sound, turn AMS (or press ./> repeatedly) to change the recorded level without turning on the “OVER” indicators on the peak level meters.
Avoid turning on these indicators
6 Press PUSH ENTER or YES.
7 Press PUSH ENTER or YES again.
The deck starts recording over the existing track. “S.F Edit(:) ** %” appears while the track is being recorded. When recording over the track, the amount of time required is roughly equal to or longer than the playback time of the track. When the recording finishes, “Complete!” appears.
Fade-in and Fade-out
Recording
1 While the deck is stopped, playing, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “S.F Edit?” appears, then press PUSH ENTER or YES.
3 Turn AMS (or press ./> repeatedly) until “Fade In?” or “Fade Out?” appears, then press PUSH ENTER or YES.
4 Turn AMS (or press ./> repeatedly) until the track number you want to change the recording level appears, then press PUSH ENTER or YES.
“Time 5.0s” appears in the display.
5 While monitoring the sound, turn AMS (or press ./> repeatedly) to change the
The deck plays the portion that will be recorded over using
You can set the time at any value between 1 second and 15 seconds, in 0.1 second increments. You cannot set the time longer than the track.
6 Press PUSH ENTER or YES.
7 Press PUSH ENTER or YES again.
The deck starts recording over the existing track. “S.F Edit(:) ** %” appears while the track is being recorded. When the recording finishes, “Complete!” appears.
continued
MDs Recorded Editing
“(S.F) Edit OK?” appears in the display. | 23GB |