Moving recorded tracks
—Move Function
You can use this function to change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered.
Example: Moving track 3 to position 2.
Track |
|
|
|
|
|
|
|
| ||
number |
|
| 1 | 2 | 3 |
|
| 4 |
| |
|
|
|
| |||||||
Original |
|
|
|
|
|
|
|
| ||
A |
| B |
| C | D |
| ||||
tracks |
|
|
| |||||||
After | 1 | 2 |
|
| 3 | 4 |
| |||
A |
| C |
| B | D |
| ||||
MOVE |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
1 While the deck is stopped, playing, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “Move?” appears, then press PUSH ENTER or YES.
3 Turn AMS (or press ./> repeatedly) until the number of the track to be moved appears, then press PUSH ENTER or YES.
4 Turn AMS (or press ./> repeatedly) until the new track position appears, then press PUSH ENTER or YES.
“Complete!” appears and the deck starts to play the moved track.
Naming a track or an MD
—Name Function
You can enter a name for a recorded MD as well as for individual tracks. Names can consist of uppercase and lowercase letters, numbers, and symbols. A total number of about
1,700 characters can be stored for all the names on the MD.
Naming a track or an MD using the controls on the deck
1 While the deck is stopped, playing, recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS until “Nm In?” appears, then press PUSH ENTER or YES.
While the deck is recording, a flashing cursor appears in the display and you can enter a name for the track being recorded. In this case, go to step 4.
3 Turn AMS until the track number (when naming a track) or “Disc” (when naming the MD) flashes, then press PUSH ENTER or YES.
A flashing cursor appears.
The deck starts playing and you can name a track while monitoring the sound.
4 Press LEVEL/DISPLAY/CHAR repeatedly to select the character type.
Each time you press the button, the display changes cyclically as follows:
(Blank space) tA (Upper cases) ta (Lower cases) t0 (Numbers) t’ (Symbols)
To enter a space
Press Mwhile the cursor is flashing. You cannot enter a space as the first character.
5 Turn AMS to select the character.
The selected character flashes.
To enter a symbol
You can use the following symbols in titles:
’
To change a selected character
6 Press PUSH ENTER.
The selected character is entered and lights continuously. The cursor shifts to the right, flashes, and waits for the input of the next character.
continued
MDs Recorded Editing