Display messages (continued)
(S.F) Edit NOW
You pressed ?/1while in S.F Edit (changing the recording level after recording,
If you turn off the deck while in S.F Edit mode, any changes that you have made will not be made properly. Finish the changes and leave S.F Edit mode before turning off the deck. If you accidentally turn off the deck while changes are being made, press ?/1while the message is displayed.
Smart Space
The Smart Space Function is on (page 11).
TOC Reading
The deck is checking the TOC (Table Of Contents) on the MD.
Setup menu table
Menu item | Reference page |
T.Mark | |
|
|
LS(T) | |
|
|
S.Space | |
|
|
P.Hold | |
|
|
F.in | |
|
|
F.out | |
|
|
Sleep | |
|
|
LPstamp | |
|
|
Specifications
System | MiniDisc digital audio |
| system |
Disc | MiniDisc |
Laser | Semiconductor laser |
| (λ = 780 nm) Emission |
| duration: continuous |
Laser output | MAX 44.6 µW1) |
1) This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical
Laser diode | Material: GaAlAs |
Revolutions (CLV) | 400 rpm to 900 rpm |
Error correction | ACIRC (Advanced Cross |
| Interleave Reed Solomon |
| Code) |
Sampling frequency | 44.1 kHz |
Coding | ATRAC (Adaptive |
| TRansform Acoustic |
| Coding)/ATRAC 3 |
Modulation system | EFM |
| Modulation) |
Number of channels | 2 stereo channels |
Frequency response | 5 to 20,000 Hz ±0.5 dB |
| during play |
Over 96 dB during play | |
Wow and flutter | Below measurable limit |
Inputs |
|
ANALOG IN | Jack type: phono |
| Impedance: 47 kilohms |
| Rated input: 500 mVrms |
| Minimum input: |
| 125 mVrms |
DIGITAL OPTICAL IN | Connector type: square |
| optical |
| Impedance: 660 nm |
| (optical wave length) |
Outputs |
|
ANALOG OUT | Jack type: phono |
| Rated output: 2 Vrms (at |
| 50 kilohms) |
| Load impedance: over |
| 10 kilohms |
General |
|
Power requirements |
|
European model: | 230 V AC, 50/60Hz |
Power consumption | 14 W (0.5 W in standby |
| mode) |
Dimensions (approx.) | 430 ⋅ 95 ⋅ 285 mm |
| (w/h/d) incl. projecting |
| parts and controls |
Mass (approx.) | 3.0 kg |
Supplied accessories
Audio connecting cords (2)
Optical cable (1)
Remote commander (remote) (1)
R6
US and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without notice.