Changing the recorded level after recording (continued)
To cancel the operation
Press MENU/NO or xin steps 1 to 6. If you press PUSH ENTER or YES in step 7 and recording starts, you cannot interrupt the operation.
Notes
•Do not disconnect the AC power cord or move the deck while recording is in progress. This may damage the recording data preventing recording from being performed properly.
•You cannot change the recorded level of a track recorded in LP2 or LP4 Stereo mode.
•Do not use an MD that is damaged or dirty. This may prevent recording data from being recorded properly.
•Changing the recording level repeatedly results in poor sound quality.
•The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level.
•The recording level cannot be changed while the timer is activated.
•You cannot undo any S.F edit operation with the Undo Function.
Undoing the last edit
—UNDO
You can undo the last edit operation and restore the contents of the MD to the condition that existed before the operation. Note, however, you cannot undo an edit operation if you perform any of the following operations after the edit:
•Start recording.
•Press MUSIC SYNC on the remote.
•Change the recorded level after recording (S.F Edit).
•Turn off the deck or eject the MD.
•Disconnect the AC power cord.
1 While the deck is stopped, playing, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “Undo?” appears.
“Undo?” does not appear if no editing has been done.
3 Press PUSH ENTER or YES.
One of the messages appears depending on the last edit operation.
4 Press PUSH ENTER or YES.
“Complete!” appears.