C71/Din Unlock
•The sporadic appearance of this message is caused by the digital signal being recorded. This will not affect the recording.
•While recording from a digital component connected through the DIGITAL IN connector, the digital connecting cable was unplugged or the digital component turned off.
,Connect the cable or turn the digital component back on.
E0001/MEMORY NG
•There is an error in the internal data that the deck needs in order to operate.
,Consult your nearest Sony dealer.
E0101/LASER NG
•There is a problem with the optical pickup.
,The optical pickup may have failed. Consult your nearest Sony dealer.
E0201/LOADING NG
•There is a problem with the loading.
,The loading may have failed. Consult your nearest Sony dealer.
Display messages
The following table explains the various messages that appear in the display. Messages are also displayed by the deck’s
Auto Cut
The Auto Cut Function is on (page 11).
Blank Disc
A new (blank) or erased MD has been inserted.
Cannot Copy
An attempt was made to make a second copy from a digitally dubbed MD (page 27).
Cannot Edit
An attempt was made to edit the MD during Program or Shuffle Play or to change the recording level of an MD recorded in LP2 or LP4 Stereo mode.
Disc Full
The MD is full (page 26).
Impossible
The deck cannot do the recording or editing operation (pages 9 and 20).
Incomplete!
The S.F Edit (changing the recording level after recording,
Initialize (flashing)
The Setup Menu settings have been lost. Or the contents recorded by the timer have disappeared over time and are not be available for saving to disc, or Program Play could not be activated since the program has disappeared over time.
(The message flashes for about four seconds when you turn on the deck by pressing ?/1.)
Name Full!
The naming capacity of the MD has reached its limit (about 1,700 characters).
No Change
While attempting to change the recording level after recording, you pressed PUSH ENTER or YES without actually changing the recording level, so no change was made.
No Disc
There is no MD in the deck.
No Name
The track or disc has no name.
Premastered
An attempt was made to record or edit to a premastered MD.
StepFull!
The program contains the maximum number of tracks. You cannot add any more tracks.
S.F Edit!
You attempted to perform another operation while in S.F Edit (changing the recording level after recording,
You cannot perform any other operations while in S.F Edit mode.
Tr Protected
You attempt to erase a protected track.
continued
Information Additional