Playing an MD (continued)

Other Operations

To

Do this

Stop play

Press x.

 

 

Pause play

Press X.

 

 

Resume play

Press Hor X.

after pausing

 

 

 

Go to the next or

Turn AMS1) clockwise (or press

a succeeding

>repeatedly).

track during play

 

 

 

Go to a

Turn AMS counterclockwise (or

preceding track

press .repeatedly).

during play

 

 

 

Go to the

Turn AMS counterclockwise (or

beginning of the

press .once).

current track

 

during play

 

 

 

Go to a specific

Turn AMS (or press ./>

track while the

repeatedly) until the track number

deck is stopped

you want to go to flashes in the

 

display, then press PUSH ENTER

 

or H.

 

 

Find a point in a

Press down m/Mduring play2)

track

or play pause3). Release it when

 

you reach the desired point.

 

 

Eject the MD

Press EJECT Aafter stopping

 

play.

 

 

1)Automatic Music Sensor

2)When you locate a point while monitoring the sound.

3)When you locate by observing the time indication.

Tips

•The MDLP indicator lights up when you select a track recorded in LP2 or LP4 Stereo mode.

•When “– Over –” appears in the display, the MD has reached the end while you’re pressing M. Turn AMS counterclockwise (or press .) or press m to go back.

Playing a track by entering the track number

Press the number button(s) on the remote to enter the track number of the track you want to play.

To enter a track number over 10

1Press >10.

“-” equal to the number of digits for the number of tracks recorded on the MD flashes.

2Enter the corresponding digits.

To enter 0, press 10/0 instead.

16GB

Examples:

•To select track number 30 on an MD recorded with 50 tracks, press >10, then 3 and 10/0.

•To select track number 30 on an MD recorded with 200 tracks, press >10, then 10/0, 3 and 10/0.

Using the MD display

Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly.

The display changes cyclically as follows:

During playing

Track number and elapsed time of the current track t Track number and remaining time of the current track t Remaining time of all recorded tracks t Track name1)

Tip

To check the track name during playing (only when the track name is recorded), press SCROLL on the remote.

The track name appears and scrolls. While the track name is scrolling, press the button again to pause scrolling, and again to continue scrolling.

In stop mode

Total number of tracks and total recorded time

tRemaining recordable time2) on the MD (recordable MDs only) tDisc name1)

1)“No Name” appears when the disc or track has no name.

2)Time shown in the display differs depending on the setting of REC MODE.

Creating your own programme

—Programme Play

You can pick out the tracks that you like and specify the playing order in a programme containing up to 25 tracks.

1 While the deck is stopped, press PLAY MODE repeatedly until “PGM” lights up in the display.

2 Turn AMS (or press ./> repeatedly) until the track number you want to add to the programme appears (or use the number button(s) on the remote to enter the track directly), then press YES or PUSH ENTER.

“Step X (X: number of the entered tracks)” appears, followed by total playing time of the programme.