4 Press
The CD player changes to play standby and the MD deck changes to recording standby.
5 Press
The deck starts recording and the CD player starts to play.
The track number and elapsed recording time of the track appear in the display.
If the CD player does not start playing
Some CD players may not respond when you press
Operations you may want to do during CD
To | Press |
Stop recording | |
| the remote |
|
|
Pause recording | |
| on the remote |
|
|
Resume recording after | |
pausing | the remote |
|
|
Check the remaining | DISPLAY on the remote |
recordable time on the | |
MD |
|
|
|
Tips
•You can use the remote of the CD player during CD
Press | To change the | And change the |
| deck to | CD player to |
|
|
|
H | Recording | Play |
|
|
|
x | Recording pause | Stop |
|
|
|
X | Recording pause | Pause |
|
|
|
•During CD
—When the CD player is connected to the DIGITAL IN connector, track numbers are automatically marked as they appear on the CD.
—When the CD player is connected to the ANALOG IN jacks, track numbers are automatically marked when “T.Mark LSyn” has been selected (page 10).
—When you resume recording after recording pause, a new track number is automatically marked, regardless of the track marking parameter setting (“T.Mark LSyn” or “T.Mark Off”).
•By reprograming the MD’s remote, you can use the procedure above to perform
Press 2 while holding down ?/1on the remote. Now you can operate both the MD deck and the video CD player. To select the remote original function, press 1 while holding down ?/1on the remote.
Notes
•When performing CD
•When you record tracks from certain CD or multi- disc players, the entire material may be recorded as a single track.