Sony MDX-C8970R — Auto Scroll, —Manual Search, 4 Press (SHIFT), Changing the display item, Locating a specific track, —Automatic Music Sensor (AMS)

During playback, press (SHIFT).

Changing the display item

Each time you press (DSPL/SA), the item changes as follows:

V

Track number/

Elapsed playback time

V

Disc name*1

V

Track name*2

V

Clock

*1 If there is no prerecorded title for a disc “NO D.Name” will appear on the display.

*2 If a track title is not prerecorded, “NO T.Name” will be displayed.

After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds.

In the Motion Display mode, all the above items are scrolled in the display one by one in order.

Tips

•If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then press (2) (T) while the disc name or track name is displayed.

•The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 33.)

Automatically scrolling a disc name— Auto Scroll

If the disc name or track name on an MD exceeds 10 characters and the Auto Scroll function is on, the following automatically scrolls on the display:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

•The disc or track name appears depending on the setting when you press (SOURCE) to select an MD.

If you press (DSPL/SA) to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off.

1

2 Press (3) (SET UP) repeatedly until “A.Scrl” appears.3 Press (5) (t) to select “A.Scrl on.”4 Press (SHIFT).

To cancel Auto Scroll, select “A.Scrl off” in step 3 above.

Locating a specific track—Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down momentarily.

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

To search forward

To search backward

Note

If “” or “” appears in the display, it means you have reached the beginning or the end of the disc and you cannot go any further.

10