Adding tracks to a programme

1 Press (SHIFT), then press (4) (PLAY MODE) for two seconds.

If you have labelled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P” above.

2 Press (2) (T) or (5) (t) to select the track slot number where you want to insert a track.

Track slot number

3 Push the SEEK/AMS control up or down to select the track you want to insert.

4 Press (6) (ENTER) momentarily to enter the track.

The current track is inserted in that slot number and the succeeding tracks shift down.

To continue inserting tracks, repeat steps 2 through 4.

Note

Once all 24 slots have been filled, “*Mem Full*” appears in the display, and you cannot insert more tracks.

5 When you finish inserting tracks, press

(4)(PLAY MODE) for two seconds.

6 Press (SHIFT).

Erasing tracks in a programme

1 Press (SHIFT), then press (4) (PLAY MODE) for two seconds.

If you have labelled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P” above.

2 Press (2) (T) or (5) (t) to select the track you want to erase.

Track slot number

The track currently registered in slot 6.

3 Press (6) (ENTER) for two seconds. When you erase a track from a slot number, the succeeding tracks shift up to fill the gap.

x

4 To continue erasing tracks, repeat steps

2 and 3.

5 When you finish erasing tracks, press (4) (PLAY MODE) for two seconds.

6 Press (SHIFT).

38