Voice Drive

You can register an appropriate vocal phrase for any source including CD/MD*, and the radio station. Once the registration is completed, you can request that source just by pronouncing the registered vocal phrase for it towards the supplied microphone. This unit provides 12 “V Drive” boxes for accommodating registered phrases.

*When you connect to a CD/MD changer with a PGM (Programme memory) function, you can request a disc in the CD/MD changer.

Use the rotary commander to control this function.

Note

While the unit is receiving, recording, or playing back the traffic announcements, the voice drive function does not work.

Selecting a “V Drive” box for registration

1 Play a CD or MD, or tune in a radio station that you wish to register a phrase for.

2 Press and hold (TALK) on the rotary commander until “V Drive” appears.

Note

When the unit enters the setting mode, the disc playback or the radio reception will be suspended.

Tip

If the “V Drive” box selected in step 2 already has a registered phrase, the source corresponding to it will be played or tuned in.

3 Select a “V Drive” box for registration by adjusting the SEEK/AMS control either on the unit or the rotary commander.

Tip

If you select an already registered box number, the registered source will be played or tuned in to.

Registering a vocal phrase

1 Once all the steps of “Selecting a “V Drive” box for registration” are completed, press (TALK) on the rotary commander .

2 After you hear the unit’s vocalised instruction “Please speak now.”, pronounce a desired phrase toward the supplied microphone.

Please speak now.

SONY

H I TS

3 After the vocalised instruction “Please repeat.”, pronounce the same phrase again.

Please repeat.

SONY

H I TS

continue to next page t

23