Press (SOUND) for two seconds.
2 Press (SOUND) repeatedly until “DSO” appears.3 Rotate the dial to select the desired DSO mode.

1 E-STD y 2 ES-CLUB y 3 ES-LIVE y

4 E-WIDE y 5 EW-CLUB y 6 EW-LIVE y 7 LIVE y 8 CLUB y off

To cancel the DSO mode, select “off.” After three seconds, the display returns to the normal playback mode.

Adjusting the balance (BAL)

You can adjust the sound balance from the left and right speakers.

1 Press (SOURCE) to select a source (tuner, CD, or MD).

2 Press (SOUND) repeatedly until “BAL” appears.
Adjusting the DSO mode

1

2 Rotate the dial to select the desired DSO mode.

1 E-STD y 2 ES-CLUB y 3 ES-LIVE y

4 E-WIDE y 5 EW-CLUB y 6 EW-LIVE y 7 LIVE y 8 CLUB y off

3 Press (5) (t).

4 Rotate the dial to select the desired effect level.

Effect 1 y Effect 2 y Effect 3 y Effect 4 y Effect 5

If you want to change the DSO mode to be adjusted at this time, press (2) (T) to return to step 2.

To restore the factory-set equalizer curve, press (6) (ENTER) for two seconds.

5 Press (SOUND) for two seconds.

When the effect setting is complete, the normal playback mode appears.

3 Rotate the dial to adjust the balance.

After three seconds, the display returns to the normal playback mode.

Adjusting the fader (FAD)

Normally, with the DSP mode on, the volume of the output sound from the front and rear speakers is lowered automatically to improve the efficiency of the listening position setting. If you want to raise the front and rear speaker volume, adjust the fader.

1 Press (SOURCE) to select a source (tuner, CD, or MD).

2 Press (SOUND) repeatedly to select the “F” for the front speakers or “R” for the rear speakers.

continue to next page t

29