During playback, press (SHIFT).

You can labell CD and CD TEXT discs with a personalised name using the disc memo function, refer to “Labelling a CD” (page 39). However, if you use personalised labels, they will always take priority over the original CD TEXT information when such information is displayed.

Tips

•If the name of the MD or CD TEXT disc is too long, you can scroll it across the display by pressing (SHIFT), then (2) (T).

•If you want to display the original CD TEXT information after labelling the CD TEXT disc with a personalised name, press (SHIFT), then (5) (t).

After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds.

In the Motion Display mode, all the above items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 33).

Automatically scrolling a disc name

— Auto Scroll

If the disc name/artist name or track name on a CD TEXT disc or MD exceeds 10 characters and the Auto Scroll function is on, the following automatically scrolls on the display:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

If you press (DSPL/SA) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off.

1

2 Press (3) (SET UP) repeatedly until “A.Scrl” appears.

3 Press (5) (t) to select “A.Scrl on.”

4 Press (SHIFT)

To cancel Auto Scroll, select “A.Scrl off” in step 3 above.

Note

For some CD TEXT discs with a lot of characters, the following cases may happen:

—Some of the characters are not displayed.

—Auto Scroll does not work.

Locating a specific track

—Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down once for each track you want to skip.

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track

—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

To search forward

To search backward

Locating a disc by disc number—Direct Disc Selection

Press the number button ((1) to (10)) that corresponds with the desired disc number.

The desired disc in the current unit begins playback.

35