Voice Memo

Voice Memo is a function that allows you to record a voiced memorandum, such as the name of a song heard on a radio programme or an idea which comes to mind. You can record up to six voice memos with this function. Note that each voice memo must be within 15 seconds.

MEMO 6

MEMO 1

MEMO 5

MEMO 2

MEMO 4

MEMO 3

You can record or play back the voice memo when listening to any source or during the clock display.

Use the rotary commander to control this function.

Note

While the unit is receiving, recording, or playing back the traffic announcements, the voice memo function does not work.

Recording a voice memo

1 Press (REC) on the rotary commander and voice your memorandum toward the supplied microphone.

2 The recording is completed by pressing (REC) again or leaving the unit untouched for 15 seconds.

Notes

The voice memos are recorded as “MEMO 1”, “MEMO 2”, etc.,…in the order they are recorded.

When a beep sounds and “MEMO FULL” appears, it means there is no room for additional voice memos. In such a case, erase the older recorded voice memos before recording new ones.

Playing back the voice memo1 Press (PLAY) on the rotary commander.

The playback starts from MEMO 1.

2 Select the desired voice memo using the SEEK/AMS control.3 Adjust the volume on the main unit or by using the rotary commander.

The unit automatically returns to the previous source after playing back all of the voice memos.

To interrupt the playback of a voice memo

Press (PLAY) on the rotary commander. Playback stops and the unit automatically returns to the previous source.

25